Share
-
TS-08
A best hot tub cover lift would bring you a lot good and convenient. It can save you much effort lifting up the heavy cover.
Product description
-
-
A best hot tub cover lift would bring you a lot good and convenient. It can save you much effort lifting up the heavy cover. Also, it can protect your deluxe cover from being unnecessary damaged by user’s rough pulling or dragging. Last but not least, it can save a lot space of placing the covers. All our lifters are made of aluminum alloy, which is rust-proof, sturdy and durable.
Product FEATURES
-
01
Easy to lift up by support of the stepping pipe
-
02
Made of Aluminum Alloy material. Rust-resistant, light weight and sturdy, rust-proof.
-
03
Requires as little clearance
-
04
Fit for nearly all square shape hot tubs
Hardware and parts list
Installation Steps
Step 1: Connect the Pivot Arm and two Bushings to the Mounting Brackets, using one Hex Cap Bolt, two Flat Washers, and one Nylon Locknut, press the decorative Large Black Dome Caps over the heads of the Hex Cap Bolts, as shown in the below picture. Then slide the Mounting Brackets under the left and right sides of the spa.
Note: If necessary, slide the Wrench behind the Mounting Bracket to tighten the Nylon Locknut.
Step2: Insert the long end of the Support Arms into the center Coupler Piece. Then slide Support Arms into the Pivot Arms. Next, insert the Lower Support Arms into the other Coupler Piece, then slide the Lower Support Arms into the remaining end of the Pivot Arms.
Step3: Lay the Cover Lift on the spa cover. Position①④, using the Self Tapping Screws to fasten the Support Arms and Coupler Piece together. Position②③, using the Self Tapping Screws to fasten the Support Arms to the Pivot Arms. Then press the decorative Small Black Dome Caps over the heads of all the exposed screws.
