-
TS-07
This round hot tub cover lift is so far the most hot-seller and affordable model in the markets. It is made of Aluminum Alloy with black coating, which is rust-proof and super stable.
Product description
-
This round hot tub cover lift is so far the most hot-seller and affordable model in the markets. It is made of Aluminum Alloy with black coating, which is rust-proof and super stable. It looks small and simple, but it can support the heaviest weight and needs least clearance behind only as 10 inch.
Product FEATURES
-
01
Made of Aluminum Alloy material. Light, stable, rust-proof, durable.
-
02
Requires as little clearance.
-
03
Suitable for rectangular and square spas of maximum size 250CM.
-
04
With a warranty
Hardware and parts list
Installation Steps
Step 1: Connect the Pivot Arm and two Bushings to the Mounting Brackets, using one Hex Cap Bolt, two Flat Washers, and one Nylon Locknut, press the decorative Large Black Dome Caps over the heads of the Hex Cap Bolts, as shown in the below picture. Then attach the Mounting Brackets to the left and right sides of the spa with the Mounting Screws.
Note: If necessary, slide the Wrench behind the Mounting Bracket to tighten the Nylon Locknut.
Step 2: Insert the Support Arms into the Center Coupler Piece. Then join the Support Arms Section into the Pivot Arms.
Step 3: Lay the Cover Lift on the spa cover. Position①, using the Self Tapping Screws to fasten the Support Arms and Coupler Piece together. Position②, using the Self Tapping Screws to fasten the Support Arms to the Pivot Arms. Then press the decorative Small Black Dome Caps over the heads of all the exposed screws.